Meshtastic ⇄ MeshCore Bridge
Two Meshes, One Conversation
Meshtastic and MeshCore radios can't hear each other. Our bridge listens to both and passes messages across. On MeshCore, add #longfast and you're linked to the public channel on Meshtastic.
The Link
One link, both directions. A message on Meshtastic's public LongFast channel shows up in MeshCore #longfast, and a message in #longfast shows up on LongFast.
How the bridge works
Both projects use LoRa radios, but they use different radio settings, packet formats and encryption, so a Meshtastic node and a MeshCore node sitting side by side ignore each other completely. The bridge is a small station with one radio of each kind, both plugged into a computer running bridge software.
-
Hear
One radio receives a message on the channel the bridge is watching: LongFast on Meshtastic or #longfast on MeshCore.
-
Translate
The software decrypts the text and adds the sender's name so people know who said it.
-
Resend
The other radio transmits the message on the paired channel, encrypted with that channel's key. From there it spreads across the other mesh like any normal message.
The exact name prefix depends on how the bridge software is configured.
Add the channel
Meshtastic users have nothing to add: LongFast is the default public channel. MeshCore users add one hashtag channel. Hashtag channels make their key from the name, so you only type the name.
-
LongFastlinked with #longfast
The default primary channel. It's almost certainly on your radio already.
KeyAQ==default, nothing to add
-
#longfastlinked with LongFast
Read and talk with Meshtastic's public channel here.
Namelongfast
In the Meshtastic app
- Connect the app to your radio.
- Check that LongFast is your primary channel with the default key. If you never changed it, it is.
- That's it. Messages from MeshCore users arrive on LongFast with the sender's name in front.
In the MeshCore app
- Connect the app to your companion radio.
- Add a channel and choose the hashtag channel option.
- Enter
longfast. Your app will show it as #longfast. - Send a short hello. It goes out on Meshtastic LongFast as well.
Good to know
- Only #longfast is bridged. Other MeshCore channels, including Public, stay on MeshCore.
- You're talking on a public channel. Meshtastic LongFast is open to anyone in range, so treat #longfast the same way.
- Only channel text crosses over. Direct messages, positions, telemetry and node info stay on their own network.
- Keep messages short. Both networks have small message size limits, and the added sender name takes up some of that space, so long messages may be cut off.
- Expect a small delay. A bridged message has to be received, relayed and retransmitted, which usually adds a few seconds.
- Coverage depends on the bridge's location. The bridge can only relay what its radios hear, and only reaches as far as the mesh around it carries the message.
Tell us in the Signal group which network you're on and roughly where you are. Someone can check whether the bridge is hearing you.